SAWMILL ALIGNMENT
Frame Setup
6
6-2
doc063022
SAWMILL ALIGNMENT
6.2
Frame Setup
Stationary sawmills should be setup on firm, level ground before proceeding with
alignment.
6.3
Blade Installation And Alignment
See Figure 6-1.
Install a blade and apply the appropriate tension. Blade tension is
adjusted with the tension handle shown below.
Electric Sawmills:
1.
Turn the key switch to the "H" position.
2.
Open the blade housing cover.
3.
Manually spin one of the blade wheels until the blade positions itself on the blade wheels.
Gas Sawmills:
1.
Turn the key switch to the "0" position and remove the key.
2.
Open the blade housing cover.
FIG. 6-1
20_119_A
090586
Cant
Control
Blade
Tensioner
H