SAWMILL ASSEMBLY
Bed Frame Assembly
2
2-13
15doc063022
SAWMILL ASSEMBLY
4.
Mount the bed extensions.
Mount the legs to the bed extensions. Next mount the main tube of the bed extension and
the supporting tube together. Mount the complete bed extension to the sawmill frame.
See Figure 2-12.
5.
Align the bed extension with the sawmill frame. Put the flat bar against the upper track rail
and check if it touches the rail along its entire lenght. If there is a gap at one end of the
bar, you need to tighten the adjusting bolt.
FIG. 2-13
Bed Ext. Main
Tube
Adjustment Bolt,
M16x160
Bed Ext. Supporting
Tube
Washer, 17
Nut, M16
Carriage Bolt,
M10x120
Nut, M10 Lock
Washer,
10,5
Bolt, M10x75
Bolt, M12x55
Washer, 13
Nut, M12 Lock