Safety & General Information
1
1-1
25doc063022
Safety & General Information
SECTION 1 SAFETY & GENERAL INFORMATION
The following symbols and signal words call your attention to instructions concerning your
personal safety. Be sure to observe and follow these instructions.
The word
DANGER
indicates an imminently hazardous
situation which, if not avoided, will result in death or serious
injury.
WARNING
suggests a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
refers to potentially hazardous situations which,
if not avoided, may result in minor or moderate injury to
persons or equipment.
Warning stripes are placed on areas where a single decal
would be insufficient. To avoid serious injury, keep out of
the path of any equipment marked with warning stripes.
Read and observe all safety instructions before operating this equipment! Also read any
additional manufacturer’s manuals and observe any applicable safety instructions
including dangers, warnings, and cautions.
Always be sure that all safety decals are clean and readable. Replace all damaged safety
decals to prevent personal injury or damage to the equipment. Contact your local
distributor, or call your Customer Service Representative to order more decals.
IMPORTANT!
It is always the owner's responsibility to comply with all applicable federal,
state and local laws, rules and regulations regarding the ownership, operation and towing
of your Wood-Mizer sawmill. All Wood-Mizer mill owners are encouraged to become
thoroughly familiar with these applicable laws and comply with them fully while using or
towing the mill.
Always properly dispose of all sawing by-products, including sawdust and other debris,
coolant, oil, fuel, oil filters and fuel filters.
Safety instructions are listed in this section by the following operations:
Blade Handling
Sawmill Setup
Sawmill Operation