SAWMILL ASSEMBLY
Sawmill with Remote Equipment
SAWMILL ASSEMBLY
15doc063022
2-8
2
correct rotation directions of all sawmill motors.
4.
Carefully raise the cutting head by about 20 cm.
5.
Turn the key switch to the “0” position. Turn the main power switch to the OFF position
and disconnect the power cord.
6.
Using a forklift truck with lifting capacity of at least 1000 kg, carefully lift the two bed
sections from the pallet.
7.
Plug the power cord again, turn the main power switch to the ON position. Switch the key
to the “M” position and lower the cutting head completely. Then turn off power and
disconnect the power cord.
8.
Lift the last bed section with the saw head.
WARNING!
When lifting the bed sections, especially the
bed section with the saw head, use extreme care and keep
all persons at a safe distance. Failure to do so may result in
serious injury or death.
IMPORTANT!
When the saw head with bed section is
taken off the pallet, remove two short legs and mount them
as shown on the picture,
!