wiwa FLEXIMIX 2 HERKULES Series, Operation Manual

Page: 68 / 80

68
Originalbetriebsanleitung FLEXI MIX 2
FMII_BAoDB_en_1401 • rs
Maintenance
7.2 Maintenance plan
The information in the maintenance plan is a recommendation. The inter-
vals may vary in dependence on the condition of materials used and outer
influences.
Interval Activity
Before each start-up Check the release agent level in the metering
pumps
Before each start-up Check the lubricant level in the fog oiler (only for
FLEXI MIX 2 PROFESSIONAL and HERKULES)
1 x per week Checking and cleaning the water separator
1 x per week Check the fog oiler and adjust it if necessary
(only for FLEXI MIX 2 PROFESSIONAL and
HERKULES)
1 x per week Visual inspection of the compressed air and
material hoses
every 50 operating hours Check the release agent of the metering pump
for material residues
depending on the type
and cleanliness of the
material or with every
material change
Clean the high pressure filter insert and material
screen in the intake system
Every three months Lubricate gear wheels on the metering pump
shaft encoders
Every three years Inspection of the compressed air and material hos-
es by an expert and replacement if necessary
7.3 Recommended operating materials
Only user original operating materials from WIWA :
Operating materials WIWA order number
Release agent (0.5 l)¹ 0163333
Release agent for isocyanate (0.5 l)¹ 0640651
Anti-freeze agent (0.5 l) ² 0631387
Pneumatic oil (0.5 l) ² 0632579
Retention agent (50 ml)³ 0000015
Lubricant (acid-free grease, 0.4kg)² 0000025
Lubricant for stainless steel² 0000233
¹ Plasticizer to fill into the release agent cups of the main pump and the feed
pumps
² for air maintenance unit
³ Materials required for maintenance and repair work (see information in spare
parts lists)
The release agent and the pneumatic oil are available in large containers on
request.