wiwa FLEXIMIX 2 HERKULES Series Operation Manual Download Page 48

Page: 48 / 80

Originalbetriebsanleitung

FLEXI

MIX

FMII_BAoDB_en_1401 • rs

Control module

5.4.14 USB datalog

The data stored in the system control

unit (volumes, alarm messages etc.)

can be downloaded to a USB stick

from the USB datalog.
To run a USB datalog, plug a USB

stick into the USB port on the control

panel and press the button in the

Main menu shown on the left.
Depending on the amount of data,

the USB datalog can take up to 40

minutes.

Fig. 54: USB datalog

5.4.15 Language selection

Press the button in the Main menu

shown on the left to open the lan-

guage selection. The language used

for the control system menus can be

configured in the language selection.

Depending on the region one of the 3

language packages “East”, “North” or

“West + South” is installed. You can

see from the flag icons what languag-

es are available in the respective

language package. Press the appro-

priate flag icon to select a language.

Fig. 55: Language package “East”

Fig. 56: Language package “North”

Fig. 57: Language package “West + South”

5.4.16 Alarm history

Press the button in the Main menu

shown on the left to have the alarm

history displayed.
The alarm history saves up to 200

alarm messages with date and time.

Once this storage limit is reached, the

oldest alarm message is deleted from

the alarm history each time a new

message is added.
Faults can be diagnosed and traced

more easily using the alarm history.

Fig. 58: Alarm history

Summary of Contents for FLEXIMIX 2 HERKULES Series

















































































Search results

Summary of Contents for FLEXIMIX 2 HERKULES Series

Reviews:

Brands by name

Popular brands

wiwa FLEXIMIX 2 HERKULES Series, Operation Manual

Search results

Summary of Contents for FLEXIMIX 2 HERKULES Series

Reviews:

Brands by name

Popular brands