Originalbetriebsanleitung
FLEXI
MIX
2
45
FMII_BAoDB_en_1401 • rs
Control module
5.4.9 Fill level indication
Container monitoring makes it possible to guarantee a constant supply of ma-
terial and hence to prevent the unit being shut down because the material con-
tainers have run dry. This assumes that the material containers are swapped
or completely filled on every update and that the filling levels are reset to the
maximum level.
Press the button in the Overview shown on the left to reset the filling levels to
the maximum level. The first Set fill level window will then be opened (material
containers for valves V1-V3).
Fig. 45: Fill level indication of valves V1-V3
Fig. 46: Fill level indication of valves V4-V6
As the system control monitors the fill levels of up to 10 material containers,
but can only show a maximum of 3 filling levels per window, the display is
distributed across a number of windows. Use the arrow buttons ( and ) to
browse forwards and backwards between the various windows. The volume unit
preset in the system control is displayed between these buttons – liters (l.) or
U.S. gallons (gal.). The fill levels are shown both as a value in liters or gallons
and graphically as a bar. The level bars of the components used in the current
recipe are blue (A) and red (B), all the other black. Set the filling level back to
the maximum level using the Set button when a material container has been
swapped or completely filled.
5.4.10 Recipe selection
Up to 10 different mixing settings can be stored as recipes and recalled in reci-
pe selection with just a few button presses.
Press the button in the Overview shown on the left to open Recipe selection.
You will then see a confirmation prompt to decide whether you really do wish
to change the recipe. If you confirm with yes, you then see the question asking
whether you wish to flush before changing the recipe.
Fig. 47: Confirmation prompt 2
Fig. 48: Confirmation prompt 1
Summary of Contents for FLEXIMIX 2 HERKULES Series
Page 2: ......
