manualshive.com logo in svg

wiwa FLEXIMIX 2 HERKULES Series, Operation Manual

Share
Download
wiwa FLEXIMIX 2 HERKULES Series Operation Manual Download Page 36

36

 

Originalbetriebsanleitung 

FLEXI

MIX

 

2

FMII_BAoDB_en_1401 • rs

Transportation, installation and assembly

4.3.2  Assembling spray hose and spray gun

WARNING

Components that do not comply with the maximum permitted operating pres-

sure of the unit can burst and cause serious injury.

 

➤

Check the maximum permitted operating pressure of the material hose 

and the spray gun before assembly. It must be greater than or equal to 

the maximum operating pressure of the unit as specified on the type 

plate.

Fit the spray hose to the material outlet of the static mixer:

Fig. 36: Assembly of the spray hose at the standard mixing unit (left)  

 

or at the external mixing unit (right)

Connect the spray hose to the spray gun as described in the operating man-

ual for the spray gun used.

4.3.3  Grounding the unit

Upon delivery the ground cable is already connected to the unit. To ground the 

unit, connect the clamp of the ground cable to an electrically conductive object.

4.3.4  Inserting the filter elements into the high pressure filters

Insert the filter elements suitable for the material to be used into the high pres-

sure filters. You can find more information in section 7.5.2 on page 71.

Summary of Contents for FLEXIMIX 2 HERKULES Series

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands