Originalbetriebsanleitung
FLEXI
MIX
2
35
FMII_BAoDB_en_1401 • rs
Transportation, installation and assembly
4.3 Assembly
WARNING
If assembly work is carried out by people who have not been trained for this
work, you endanger yourself and other people and impair the safety and
reliability of the unit.
➤
Electrical components must only be mounted by trained time-served
electricians – with all the other components, e.g. the spray hose and the
spray gun being assembled by trained personnel only.
4.3.1 Assembling hose package
When using an external mixing unit, the hose package is used to connect the
external mixing unit to the intermediate piece.
WARNING
If the hose package couplings are subjected to tensile load, these assem-
blies may be torn out. Material escaping under high pressure can cause
injuries and material damage.
➤
If tensile loads on the hose package couplings are to be expected
(e.g. by positioning the mixing unit), a strain relief is required.
If the hose package is too tightly bent, hoses may buckle inside the hose
package.
➤
The minimum bending radius of 30 cm must not be fallen short of!
Fig. 34: Connections on the intermediate piece
5
2
1
3
4
4
1
3
2
5
Fig. 35: Connections on the mixing unit
Nr. Connection
1
A component flow
2
A component return flow
3
Flushing
4
B component flow
5
B component return flow
Summary of Contents for FLEXIMIX 2 HERKULES Series
Page 2: ......
