66
Originalbetriebsanleitung
FLEXI
MIX
2
FMII_BAoDB_en_1401 • rs
Operation
6.6.2 Decommissioning for a long period or permanently
When decommissioning for a long period or permanently, clean the unit com-
pletely, perform a pressure release, switch off the unit, disconnect the com-
pressed air supply and unplug the electrical power supply.
1.
Perform all work steps as described in chapter 6.5 on page 64, in order
to clean the unit completely.
2.
Regulate the compressed air pressure regulator for the flushing pump fully
back.
3.
Switch off the unit at the master switch on the control panel.
4.
Shut off the air supply on the compressor.
5.
Relieve the pressure from the air hose between the compressor and the
compressed air connection of the unit.
6.
Disconnect the air hose from the the compressed air connection of the unit.
7.
Unplug the electrical power supply.
6.7 Waste disposal
At the end of use, you must shut down and dismantle the unit and dispose of it
in accordance with legal regulations.
➤
Clean the unit thoroughly of all material residues.
➤
Dismantle the unit and separate all materials – dispose of metal together
with scrap metal; plastic parts can be disposed of as domestic waste.
➤
Rests of spraying material, cleaning agent, oils, greases and other chem-
ical substances must be collected in accordance with statutory provisions
concerning recycling and waste disposal. The official local waste water
laws are valid.
Summary of Contents for FLEXIMIX 2 HERKULES Series
Page 2: ......
