50
Originalbetriebsanleitung
FLEXI
MIX
2
FMII_BAoDB_en_1401 • rs
Control module
5.5 Setup
All the important parameters for set-
ting up the system control are stored
in the Setup menu. For setting up
the system control must be switched
to Stop. You will see an appropriate
note if you try to open the Setup
menu from another operating mode.
Please note that this menu is pass-
word protected and therefore only
accessible to authorised persons.
The relevant persons will have the
password. Please contact
WIWA
should the password have been lost.
Press the button in the Main menu
shown on the left to open the Setup
menu.
You will then see the password
prompt. The first page of the Setup
menu will open once the password
has been entered.
Fig. 62: Note concerning the operating mode
Fig. 63: Password prompt
Fig. 64: Setup menu part 1
1
2
3
4
5
6
7
Fig. 65: Setup menu part 2
9
10
8
5
Use the arrow buttons ( and ) to browse forwards and backwards between
these two menu windows.
No. Function
1
Volumetric measurement
2
Set up flushing program
3
Set hose volume and mixer type
4
Configure filling level monitoring
5
Log out from the Setup menu and return to the Main menu
6
Set date and time
7
Manual valve control
8
Set up valve management
9
Set up recipes
10 Change to the Service level (accessible only to
WIWA
Customer Service)
Summary of Contents for FLEXIMIX 2 HERKULES Series
Page 2: ......
