manualshive.com logo in svg

WIRTGEN HAMM GRW 280, Operating Manual, Page: 36 / 218

Share
Download
WIRTGEN HAMM GRW 280 Operating Manual Download Page 36

General 

Stickers on the machine 

36

2153734_02_BAL_GRW280_H195_en

© HAMM AG 2011

Motor Stop

Hazard due to rotating parts! With the machine running, serious injuries

or fatality may be caused. Prior to maintenance work, shut down engine

and remove ignition key. Wait until all machine components have come

to a standstill.

Hot surface

Risk of burns! Surfaces can be very hot. Do not touch surface. Keep

away.

Air conditioning

Risk of burns! Coolant of the air-conditioning can cause serious injuries

or fatality. Follow operating and maintenance instructions.

Chip spreader

Hazard due to rotating parts! Moving machine components can cause

serious injuries or fatality. Prior to maintenance and adjustment works,

shut down machine and remove ignition key.

Summary of Contents for HAMM GRW 280



























































































































































































































Reviews:

No comments