Operation
Stopping, switching off engine, leaving machine
106
2153734_02_BAL_GRW280_H195_en
© HAMM AG 2011
Switch off engine
Do not switch off engine directly after full load operation. Instead, let
it run for 1-2 minutes with idle speed for temperature compensation
purposes.
1. Key [310] —
I → 0
The battery discharges rapidly if the engine is at a standstill and
the electrical system is switched on (switch [310] in position I).
000-02
Leaving the machine
The driver may only leave the machine when orderly parked. Traffic
regulations have to be observed as well.
Before leaving the machine, the driver must ensure that
The driver's seat console is latched in the centre of the machine.
The ignition key is disconnected.
The machine is switched off at the battery isolating switch and the
key is removed.
The cabin doors resp. the instrument panel covering, as well as all
cladding covers are locked.
The machine is secured against rolling away by suitable additional
securement measures (e.g. wheel chock) when parking on uphill or
downhill slopes.
713-30