manualshive.com logo in svg

WIRTGEN HAMM GRW 280, Operating Manual, Page: 177 / 218

Share
Download
WIRTGEN HAMM GRW 280 Operating Manual Download Page 177

 Maintenance

 Drive

© HAMM AG 2011

2153734_02_BAL_GRW280_H195_en

177

Variant 2

 WARNING!

Unsuitable brake fluid will cause malfunctions.

Danger due to delayed braking response.

Fill in the specified brake fluid only.
Before using any organic hydraulic fluid or before changing the oil

grade, please observe the specifications included in the technical

data (

see page 189

 sqq.)

002-62

 

Brake oil, variant 2

1. Switch off diesel engine and remove ignition key.
2. Undo the screws [A] (4 screws) at the cover [B], and remove the

cover [B].

3. Check brake oil level in storage reservoir [C].
4. Correct brake oil level: maximum marking at storage reservoir [C].

Do not exceed this level!

5. Fill in appropriate brake oil if the oil level is low.
6. Fasten the cover [B] back in place using the screws [A] (4x).
7. In case of bigger brake oil losses, find out and eliminate the cause.

Lubricant only admissible if containing this marking (

see page

189

 sqq.).

818-03

4.08.07

Changing the brake oil

The brake oil is to be changed according to the instructions of

the manufacturer. Call the customer service!

Summary of Contents for HAMM GRW 280



























































































































































































































Reviews:

No comments