Maintenance
Hydraulic oil supply
© HAMM AG 2011
2153734_02_BAL_GRW280_H195_en
171
4.05.04
Replacing filter insert of pressure filter for hydraulic system
WARNING!
Hot surface, hot fluids!
Risk of burns due to hot surfaces and fluids.
Prior to maintenance works, allow machine to cool down to a
temperature under 30 °C (86 °F) .
Do not touch hot machine parts.
002-32
Perform following maintenance work on 2 filters:
1. Switch off diesel engine and remove ignition key.
2. Allow machine to cool down below a temperature of 30 °C (86 °F).
3. Unscrew the cup-shaped housing [A].
4. Pull the filter insert [B] from the filter head and replace with a new
one.
5. Clean the inside of the cup-shaped housing, screw it back to the filter
head and tighten.
836-05