General
Stickers on the machine
34
2153734_02_BAL_GRW280_H195_en
© HAMM AG 2011
Explanation on how to use
loading tables:
WARNING!
High accelerating forces will occur during transport!
Danger to life if the machine rolls away or tilts sideways inadvertently.
Determine α and β angles at every of the 4 lashing points.
Determine the lashing point strength at the vehicle, depending on
angles α and β.
Use the right vehicle.
Use the right lashing device, according to angles α and β.
002-58
Weigh the machine before you load it unless the current machine
weight is already known. Otherwise, use the maximum weight
(see type plate) as the machine weight.
000-16
Select the corresponding loading table based on the machine weight.
If the position of the lashing points on the load platform allows but an
angle α = 20° and an angle β = 30°, the lashing point strength of the load
platform must be not less than 7000 daN at these lashing points.
Ensure that the machine is secured according to the following minimum
requirements: Lashing chain of quality 13/8 (10000 daN) or lashing strap
with LC = 10000 daN.
1.12
Stickers on the machine
Below you will find all used stickers. You will find the precise
arrangement of stickers in the spare parts catalogue.