manualshive.com logo in svg

WIRTGEN HAMM GRW 280, Operating Manual, Page: 105 / 218

Share
Download
WIRTGEN HAMM GRW 280 Operating Manual Download Page 105

 Operation

 Stopping, switching off engine, leaving machine

© HAMM AG 2011

2153734_02_BAL_GRW280_H195_en

105

3.04

Stopping, switching off engine, leaving machine

 WARNING!

Uncontrolled driving behaviour!

Risk of fatal injury due to the machine's own driving movements.

Switch off diesel engine even if you leave the operator platform only

for short time.

002-22

 

Stop

1. Drive lever [501] — 

CENTRE

2. Service brake [512] —

 PRESS

 pedal

In exeptional cases, the speed of the diesel engine may increase

in the beginning due to the hydrostatic brake system [512]. In

this case quickly push the pedal [512] through to activate the

multiple-disc spring operated brake.

Before switching off the

engine

1. 0-position lock / parking brake (502) — position 

0

2. Lower attached accessory equipment completly.

Summary of Contents for HAMM GRW 280



























































































































































































































Reviews:

No comments