Wintriss autoset 1500, User Manual

Page: 93 / 102

Wiring and Settings Tables A-1
Appendix A. Wiring and Settings Tables
This appendix provides tables identifying wiring connections and switch settings for
components on the AutoSet processor board.
* Ground wire (green or green/yellow) should be connected to ground stud on ceiling of enclosure.
* Shield should be connected to ground stud on enclosure nearest entry of
strain link wiring.
* Shield should be connected to ground stud on enclosure nearest entry of
strain link wiring.
Table A-1. AC Power and Stop Circuit Wiring Connections, TB103
Pin # Label Function Wire Color *
1 HI AC power Black
2 NEU AC power White (115 VAC), Red (230 VAC)
3 GND AC power Not used
4 GND AC power Connected to case lug
5 N/O Stop circuit N.A.
6 C Stop circuit N.A.
Table A-2. Strain Link Wiring Connections, TB105 - TB108: Tension
Pin # Wire Color * Function
1 Unused
2 Green Input +
3 White Input -
4 Black Ground
5 Red Exc +
Table A-3. Strain Link Wiring Connections, TB105 - TB108: Compression
Pin # Wire Color * Function
1 Unused
2 White Input +
3 Green Input -
4 Black Ground
5 Red Exc +