1-29
AUDIO ADJUSTMENTS
This adjustment leads to a menu of adjustments relating to the audio system.
Current Volume
This sets the audio volume level.
Settings:
0 to 31
Factory Setting: 12
Minimum Volume Override
This controls whether the audio volume level can be adjusted below a minimum
threshold, including off.
Settings:
Yes or No
Factory Setting: No
Volume Interlock
This controls whether a flipper button needs to be pressed in order to allow the audio
volume level to be changed from the diagnostic buttons. The purpose of this adjustment
is to avoid inadvertent volume level changes.
Settings:
Yes or No
Factory Setting: No
CLOCK/FORMAT
This adjustment leads to a menu of adjustments for the Clock feature.
24 Hour
Euro Score Format
COMMUNICATIONS
This adjustment controls machine communications with the outside world. For example, serial,
modem, etc.
COM 1 (DB9) Usage
This adjustment cannot be changed. COM 1 is used for extracting Audits, Adjustments
for the Printouts Menu. Connect terminal (emulator) at 9600 baud, 8 bits, no parity,
1 stop bit.
Setting:
Shell Terminal
COM 2 (DB25) Usage
This determines what external device (if any) is connected to the COM 2 port.
Settings:
None, Midas, VDAI
Midas Enabled
This enables the second serial port to work with the Midas Security Unit.
VDAI (For Germany only at this time)
This enables the port to use the VDAI Printer Kit for the MAS-3000 and Mini-
drucker printers. The required VDAI Printer Kit is sold separately.
Summary of Contents for Pinball 2000 Star Wars Episode I
