Williams Pinball 2000 Star Wars Episode I, Operation Manual

Page: 83 / 152

2-14
A-23001-R-3 Flipper Assembly
Item Part Number Description
1 1 B-13104.1-R Flipper Bracket Assembly,
Right
2 SW-1A-194 Switch Assembly
3 03-9878 Shock Deflector
4 4006-01003-08 MS 6-
32 x ½” P-PH-S
5 4008-01227-05 MS 8-
32 x 5/16” Pin Hd-SEMS
6 01-14998 Switch Bracket
7 4010-01066-06 CS-10-
31 x 3/8” SH
8 4701-00004-00 LW #10 Split
9 A-12390 Flipper Stop Bracket Assembly
10 FL1-11722 Flipper Coil (Green)
11 01-7695-1 Solenoid Bracket
12 4006-01003-04 MS 6-
32 x ¼” P-PH-S
13 10-364 Spring
14 4006-01003-07 MS 6-
32 x 7/16” P-PH-S
15 4406-01128-00 Nut 6-32 Keps
16 A-23000 Flipper Crank Link Assembly
16a) A-22999 Flipper Crank Assembly
16a)1. 01-11764-R Flipper Crank, Right
Item Part Number Description
16a)2. 01-9376 Bracket Retaining Spring
16a)3. 04-11222 Locking Stud
16a)4. 4410-01127-00 Nut 10-32 Hex Heavy Duty
16a)5. 4700-00107-00 FW .203 x .625 x .104
16a)6. 4701-00004-00 LW #10 Split
16b) A-15847 Flipper Link Assembly
16c) 02-4676 Bushing
– Link Spacer
16d) 4010-01086-14 CS 10-
32 x 7/8” SH
16e) 4700-00023-00 FW .203 x .625 x .059
16f) 4701-00004-00 LW #10 Split
16g) 4410-01132-00 Nut 10-32 ESNA
17 23-6577 Bumper Plug
18 03-7568 Flipper Bushing
19 03-7066-5 Coil Tubing
Associated Parts: (Not Shown)
23-6519-4 Flipper Ring - Red
20-10110-6 Flipper Bat w/Shaft
Notes…
Each Flipper Assembly is mounted beneath the playfield, in conjunction with the Plastic Flipper & Shaft
,
and Flipper Rubber on the upper side of
the playfield.
1. With the flipper, in the non-activated position, the E.O.S. Switch contacts must have a gap of .062 (

.015) inch. When flipper is activated
switch must close.
2. Any adjustment of the E.O.S. switch must be made at a minimum distance of 0.25 inch from the switch body.
3. Longer blade of E.O.S. switch must be made straight. Gap adjustment is done by adjusting shorter blade.
4. All moving elements of the assembly must operate freely without any evidence of binding.
Apply Loctite

245 when reattaching screws to the Flipper Stop Assembly, the Solenoid Bracket, and the Flipper Bushing.
Centerline of flipper
shaft (not shown).