Williams Pinball 2000 Star Wars Episode I, Operation Manual

Page: 35 / 152

1-21
FEATURE ADJUSTMENTS CONTINUED…
Hover Tank Scene Speed
This sets the speed that the roving catapult moves during the Hover Tank scene.
Settings:
Fast, Medium, Slow
Factory Setting: Medium
Musical Chairs Silence (seconds)
This sets the time (in seconds) that the music is stopped during the musical chairs scene.
Settings:
10 to 30
Factory Setting: 20
Probe Droid Scene Speed
This sets the speed that the roving gun moves during the Probe Droid scene.
Settings:
Fast, Medium, Slow
Factory Setting: Medium
Side Targets Difficulty
This sets the difficulty of the side targets.
Settings:
Hard, Medium, Easy
Factory Setting: Medium
Easy - Hitting any target adds a light.
Medium
– Hitting a target turns that light on ONLY. If two lights are on, hitting any target
will complete the bank.
Hard
– Hitting a target turns that light on ONLY.
Skill Shots for Awards
This selects the number of skill shots needed for players to get an award (JEDI letter).
Settings:
0 to 10
Factory Setting: 3
C3P0 Game Start Spot
This sets the number of lights that are lit on C3P0 (the left loop) at the start of the game.
Settings:
0 to 7
Factory Setting: 4
C3P0 Memory
This can disable the memory feature on C3P0 (the left loop) causing it to reset between
each ball. Note that C3P0 will NEVER reset between balls until he has been completed
at least once.
Settings:
Yes, No
Factory Setting: Yes (Do NOT reset between balls.)
Lasers at Game Start
This sets the number of lasers the player has at game start.
Settings:
0 to 20
Factory Setting: 10
Maximum Laser Count
This sets the maximum number of lasers a player can have during a game.
Settings:
30 to 70
Factory Setting: 50
GUNGAN Memory
This can enable the memory feature on the GUNGAN spellout (in the jets) causing it to
NOT reset between balls.
Settings:
Yes, No
Factory Setting: No (Reset between balls.)