Williams Pinball 2000 Star Wars Episode I Operation Manual Download Page 141

Page: 141 / 152

3-23

Wiring Diagram for 24 Opto Switch - #41 Shield Hit

This diagram shows the wiring for switch #41 Shield Hit. See page 3-20 for the wiring diagram for the
Ball Trough Assembly opto switches and page 3-21 for the individual opto switches wiring diagram.

This switch uses a green Individual LED board (P/N A-16908), and a blue Individual Photo Transistor
board (P/N A-16909).

OPTO SWITCH OPERATION:

The ball rolls between the Individual LED board and the Individual Photo Transistor board and breaks the
beam. The br

oken beam ‘makes’ the switch.

Summary of Contents for Pinball 2000 Star Wars Episode I

























































































































































Search results

Summary of Contents for Pinball 2000 Star Wars Episode I

Reviews:

Related manuals for Pinball 2000 Star Wars Episode I

Brands by name

Popular brands

Williams Pinball 2000 Star Wars Episode I, Operation Manual

Search results

Summary of Contents for Pinball 2000 Star Wars Episode I

Reviews:

Related manuals for Pinball 2000 Star Wars Episode I

Brands by name

Popular brands