Williams Pinball 2000 Star Wars Episode I, Operation Manual

Page: 30 / 152

1-16
LAMP TESTS CONTINUED…
Lamp Row/Column Test
This test allows entire individual rows and columns in the lamp matrix to be operated.
Press the Up and Down buttons to cycles through the different rows and columns. The
rows in Matrix A light first, followed by the columns. Next, the rows in Matrix B light
followed by the columns.
All Lamps Test
This test causes all the controlled lamps to flash at the same time. Every controlled lamp
should flash. Any other results indicate the system has detected a problem.
Lamp and Flasher Test
This test flashes all the controlled lamps and the solenoid flashers at the same time.
Every bulb should light. Any other results indicate the system has detected a problem.
Ordered Lamp Test
This test lights each lamp in order. Every lamp should light in its turn. Any other results
indicate the system has detected a problem.
SOLENOID TEST
The Solenoid test has three modes -- Repeat, Stop, and Run. Only one solenoid should pulse at
a time. The system has detected a problem if more than one solenoid pulses, a solenoid comes
on and stays on, or no solenoids pulse during the Repeat and Run modes.
Repeat
The Repeat mode activates an individual solenoid. Press the Enter button to start this
test. The name of the first solenoid shows in the display and the corresponding coil
pulses. Press the Up or Down buttons to cycle through the solenoids, one at a time. The
same solenoid pulses until you press the Up or Down buttons to advance to the next or
previous solenoid. To advance to the Stop mode, press the Enter button.
Stop
The Stop mode halts the Solenoid test. No solenoids should be active. To advance to
the Run mode, press the Enter button.
Run
The Run mode loops through the solenoids automatically. The screen shows the name
and number of the solenoid currently being pulsed. To return to the Repeat mode, press
the Enter button.
AUDIO TESTS
The Audio Tests lead to a menu of tests for the audio circuits. Note that the only way to end an
audio test is to use the Stop Audio Test feature.
Left Channel
This test causes music to be heard through the left side speakers.
Center Channel
This test causes music to be heard through the left and right speakers simultaneously.
Right Channel
This test causes music to be heard through the right side speakers.
Test Knocker
This test makes the knocker sound.