All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
55
8.0. Service
8.6. Removing the drive protection
ATTENTION DANGER!
Before removing the
drive protection, you
must disengage the drive
elements, switch off the
motor of the tractor,
remove the ignition key,
and wait for all moving
parts to come to a
standstill.
The drive protection must be
removed for maintenance on the
drive of the sweeping head or
multifunction head.
Loosen the three screws (A)
and remove.
Remove the drive protection.
8.7. Gearbox
Changing the gear oil of the
multifunction head
Place a drip tray under the
multifunction head.
Unscrew the drain screw (A).
Unscrew the venting screw
(B).
Catch the oil draining out in
a suitable vessel.
Screw the drain screw in
again.
Refill the oil up to the
level of the inspection
opening (C).
Dispose of old oil and empty
packaging in an
environmentally responsible
way.
