All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
47
8.0. Service
8.1. General information
All work for maintenance,
repair and disassembly must
be done by qualified
technicians only.
Carry out all maintenance
work while the machine is
attached to a tractor.
Always carry out repair,
maintenance and cleaning
work, including the
elimination of malfunctions,
with the drive turned off
and the engine stopped.
Remove the ignition key.
Use
original parts only
;
parts from other
manufacturers are often not
of the required quality and
therefore constitute safety
hazards. Furthermore, the
guarantee only retains its
validity, and legitimate
guarantee claims can only be
recognized, if
original
parts from Wiedenmann
have
been used exclusively.
We would like to draw your
attention, in particular, to
the fact that original parts
which are not supplied by
Wiedenmann have neither been
tested nor approved by
Wiedenmann. The installation
and / or employment of such
products can, in some
circumstances therefore,
have negative structural
effects on your vehicle and
negatively affect active and
/ or passive safety. The
manufacturer is in no way
liable for damage resulting
from the use of parts from
other manufacturers.
Welding of bearing parts of
the vehicle may only be
carried out according to
the accepted rules of
welding technology.
Replace damaged tools.
Cutting blades do not need
sharpening. Replace the
cutting blades if they are
dull.
The edges of the
verticutting knives that
enter the ground are
rounded by use. In this
case, you should turn the
verticutting blade around.
Replace verticutting knifes
when they are round on both
sides.
When installing the tools,
note that in many cases the
first and outer, and last
and outer, tool brackets
must only be partly
equipped, or not equipped
at all.
For this work, please use
your personal protective
equipment (PSA) such as:
gloves, goggles, ear
protectors.
Machine maintenance
involves not only
lubrication but also
cleaning. After completion
of work, the machine should
be washed and thoroughly
checked over.
