All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
22
3.0. Assembly
3.1. General information
ATTENTION DANGER!
Do this work only when the
machine is attached to the
tractor. The tractor must be
shut down and secured against
accidental starting.
Close the safety valves at
both telescope cylinders to
secure the container against
accidental lowering.
For this work, please use
your personal protective
equipment (PSA) such as:
gloves, goggles, ear
protectors.
Attachment must be carried
out on solid flat ground
only.
3.2. Attaching drawbar
Two persons are required to
attach the drawbar.
To ensure that support (A)
remains active, the bottom
fastening bolt must not be
removed.
Position the drawbar (B) at the
front on the fishplates.
Insert the bottom hexagon bolts
(C) from inside to outside at
the bottom holes of the drawbar
(B).
Screw the nuts on hand-tight.
Swivel drawbar (B) upwards and
insert hexagon bolts (D) from
outside to inside.
Screw on all hexagon nuts and
tighten them.
