All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
35
6.0. Before Using
6.1. General information
Check whether all
connection parts necessary
for complete delivery are
there.
Observe the technical data
when connecting to other
tractor types.
Set the specified speed and
direction of rotation of
the universal shaft (decal
on the machine) so it
matches that of the
tractor.
The sticker shows the speed
and direction of rotation
for which the machine is
set.
Grease the universal shaft
(see Operating Instructions
for the universal shaft).
The warning and information
signs on the machine
provide important
information for safe
operation. Observe them for
your own safety.
ATTENTION:
Do not carry out a test run
of the multifunction head
on paved surfaces. The
cutting blades and
verticutter knives can be
damaged.
ATTENTION:
Electronic devices are
inherently not fail-safe.
The user is therefore
responsible for placing the
drive in a safe state if
the device fails, otherwise
persons may be injured
and/or property may be
damaged.
ATTENTION:
For safety reasons the
control panel must not be
used during transportation
unless its use will not
endanger traffic safety.
Local laws and regulations
must be observed.
