All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
45
7.0. Operation
7.6. Faults and remedies
Description
Cause
Solution
Super 600 is not working
even though the cardan
shaft is running
Drive belt is torn
Replace the drive belt
Drive belt slips
Tighten the drive belt
Super 600 vibrates or
engine runs erratically
Tools are damaged or the
tool roller is missing tools
Replace tools or add
missing tools
Material is being collected
poorly or not at all during
verticutting
Verticutting knives have
been shortened by wear
Replace tools the
verticutting knives
Verticutting knives have
been worn down unevenly
Turn the verticutting knives
by 180° or replace them
Damp collection
material
Reduce working depth
Reduce working speed
Use components with
greater spacing
Heavy dew
Reduce working depth
Reduce working speed
Wait until the ground has
dried out
Too much material
Reduce working depth
Reduce working speed
Use components with
greater spacing
Dethatching blades too
close
Reduce working depth
Reduce working speed
Use components with
greater spacing
Screen surfaces of catcher
and hopper blocked
Clean
(see Capter 7.5.)
Channel blocked
Clean
