Western Digital ActiveScale P100, Support Manual

Page: 67 / 140

ActiveScale™ P100 Support Guide
65
4.1 Reading cable labels
Cable labels in ActiveScale systems use a standard format to indicate where they should be connected in
the system. This format is based on a set of provided component and port abbreviations. Using these port
numbers and component abbreviations, you can determine the connection points for each cable.
Components and ports are numbered and abbreviated as shown.
Note: System Expansion Nodes have unlabeled cables. When cabling System
Expansion Nodes, refer to the cable wiring key on the System Interconnect and
the diagrams in this section for the correct cable locations.
Figure 4-45. ActiveScale P100 components and port identification
Figure 4-46. Example cable label