Western Digital ActiveScale P100 Support Manual Download Page 27

Page: 27 / 140

ActiveScale™ P100 Support Guide

2.3.1.1 Storage Node front and rear view

2.3.1.2 Physical port to Ethernet device mapping

2.3.1.3 Storage Node LEDs, buttons, and ports

Table 2-5. Storage Node control panel LED and button descriptions

Number

Name

Description

LED action

Power button with
LED

Powers the system on or off. LED
indicates that the component is
powered on.

•

Solid blue

—Powered on

•

Off

—Powered off

ID button

Activates or deactivates the
identification LED.

N/A

Identification LED

Indicates that the identification
feature has been activated.

•

Blinking

—Identification LED

has been activated.

•

Off

—No identification request.

Summary of Contents for ActiveScale P100













































































































































Search results

Summary of Contents for ActiveScale P100

Reviews:

Related manuals for ActiveScale P100

Brands by name

Popular brands

Western Digital ActiveScale P100, Support Manual

Search results

Summary of Contents for ActiveScale P100

Reviews:

Related manuals for ActiveScale P100

Brands by name

Popular brands