manualshive.com logo in svg

WEISS 3RT2017-1BB42, Manual

Share
Download
WEISS 3RT2017-1BB42 Manual Download Page 99

Manual R06-2016

99 / 172

ROTARY INDEXING TABLE CONTROLLER

 

EF2...B

OPERATION / DESCRIPTION OF WEISS SOFTWARE | 

8.3 Machine configuration

I/O configuration PROFIBUS EF1

With the EF1 compatible I/O configuration, the interfaces are compatible to the WEISS rotary indexing table control-
ler EF1.

➱

Inputs and outputs are assigned to the control functions which are defined as default.

➱

Individual assignments cannot be deleted or changed.

➱

The display of control functions is informative.

1. Select PROFIBUS interface

2. Select EF1 compatibility mode.

3. Click the Next button.

➱

The window for I/O configuration - PROFIBUS settings is opened.

4. Enter the PROFIBUS DP address.

5. Choose the PROFIBUS baudrate.

6. Click the Next button.

➱

The window for I/O configuration / PROFIBUS "EF1 / Lenze" compatible is opened.

2.

1.

3.

4.
5.

6.

Summary of Contents for 3RT2017-1BB42













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands