manualshive.com logo in svg

WEISS 3RT2017-1BB42, Manual

Share
Download
WEISS 3RT2017-1BB42 Manual Download Page 92

Manual R06-2016

92 / 172

ROTARY INDEXING TABLE CONTROLLER EF2...B 

OPERATION / DESCRIPTION OF WEISS SOFTWARE | 

8.3 Machine configuration

Default configuration data mapping:

➱

Inputs and outputs are assigned to the control functions which are defined as default.

➱

Individual assignments can be deleted or changed.

➱

Functions displayed in grey in the "Control functions" selection field are already assigned, those displayed in 
black can still be assigned.

Fig. 58: Default configuration data mapping PROFIBUS

9. Select default configuration.

10.Click the Next button.

➱

After the Next button has been clicked, a comment box appears.

For a description of the comment box, refer to chapter 8.3.5.3 „Comment regarding I/O configuration data file“ 
on page 106.

By clicking on the Next button in the comment box, the I/O configuration is completed and the window 
for adjusting the system time is opened.

(see chapter  „Adjust system time“ on page 93)

10.

9.

Summary of Contents for 3RT2017-1BB42













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands