manualshive.com logo in svg

WEISS 3RT2017-1BB42, Manual

Share
Download
WEISS 3RT2017-1BB42 Manual Download Page 93

Manual R06-2016

93 / 172

ROTARY INDEXING TABLE CONTROLLER

 

EF2...B

OPERATION / DESCRIPTION OF WEISS SOFTWARE | 

8.3 Machine configuration

Adjust system time

1. Adjust system time.

The currently displayed time can be used as the system time, a new time can be defined, or the PC time can 
be transferred.

2. The connection of the optional modules is displayed during the configuration of optional modules.

3. Transfer adjustments.

➱

The machine configuration is completed.

➱

All settings are accepted.

➱

The controller needs to be restarted.

Connecting optional modules

The proper connection of all optional modules is mandatory for accepting the settings and the later operation.
As an alternative, no optional modules need to be connected for taking over the settings. In this case, the rotary inde-
xing table does not become operative until all optional modules are properly connected.

1.

3.

2.

Summary of Contents for 3RT2017-1BB42













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands