WEISS 3RT2017-1BB42 Manual Download Page 112

Page: 112 / 172

Manual R06-2016

112 / 172

ROTARY INDEXING TABLE CONTROLLER EF2...B

OPERATION / DESCRIPTION OF WEISS SOFTWARE |

8.4 Maintenance

8.4.1.2 Request configuration file (controller internal backup file)

By clicking the button " Request configuration file", the current configuration file can be requested as an XML file.

Fig. 63: Request configuration file (controller internal backup file)

This file can either be opened for viewing or saved on a PC.

This file contains all configuration settings that were made.

It can therefore be used as to restore a configuration.

The function "Indexer configuration via file" (chapter 8.3.4.2 „Indexer configuration via file“ on

page 86) can only be carried out if the configuration file of a completely configured rotary indexing table was reque-
sted and stored beforehand.

Summary of Contents for 3RT2017-1BB42













































































































































































Search results

Summary of Contents for 3RT2017-1BB42

Reviews:

Brands by name

Popular brands

WEISS 3RT2017-1BB42, Manual

Search results

Summary of Contents for 3RT2017-1BB42

Reviews:

Brands by name

Popular brands