manualshive.com logo in svg

WEISS 3RT2017-1BB42, Manual

Share
Download
WEISS 3RT2017-1BB42 Manual Download Page 7

Manual R06-2016

7 / 172

ROTARY INDEXING TABLE CONTROLLER

 

EF2...B

INTRODUCTION | 

1.1 Definition

1

INTRODUCTION

1.1

Definition

Rotary indexing table controller EF2...B

The EF2...B rotary indexing table controller is used for the easy to operate and time-optimised control of rotary inde-
xing tables of the TC and TR series in all frame sizes.

The controller is optimally designed for operation with the TC and TR rotary indexing tables and offers you the follo-
wing benefits:

•

Optimally tuned frequency converter control for electro-mechanical WEISS rotary indexing tables

•

Intuitive, web-based user interface for fast commissioning

•

No brake wear, soft start-up from intermediate positions minimizes the impact on the gearing

•

Increased performance through fully automatic optimisation cycle

•

Remote support and remote diagnostics options

•

Worldwide use due to various power supply configurations

•

Compact hardware (all-in-one)

•

Fieldbus connection: PROFIBUS and PROFINET on board

•

Interface: Digital I/O optional with TM15 module

•

Integrated safety function SIL2 / PLd

•

SIL3 / PLe available with additional measures

1.2

Intended use

The components for the controller and drive are approved for industrial and commercial application in  industrial 
mains supply.

All information regarding the technical data and the permissible conditions at the location of use must be complied 
with.

Commissioning (starting the intended operation) of the machine in which the components described here are to be 
installed is not allowed until the conformity of the machine with the  EMC Directive 2014/30/EC and the Machinery 
Directive 2006/42/EC has been determined.

The operation of the controller is permissible only in enclosed housings or in superordinate control cabinets with clo-
sed protective covers while using all protective equipment.

1.3

Target group

These instructions are intended for persons who are responsible for planning, installation, as well as maintenance 
and service, and have the adequate qualification and skills to perform these tasks.

Handling the components of the controller is permitted only by qualified and trained personnel who know and comply 
with all safety instructions as stated on the components and in the relevant technical user documentation.

Summary of Contents for 3RT2017-1BB42













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands