manualshive.com logo in svg

WEISS 3RT2017-1BB42, Manual

Share
Download
WEISS 3RT2017-1BB42 Manual Download Page 85

Manual R06-2016

85 / 172

ROTARY INDEXING TABLE CONTROLLER

 

EF2...B

OPERATION / DESCRIPTION OF WEISS SOFTWARE | 

8.3 Machine configuration

3. Select the type of indexer.

4. Select motor.

5. Select basic options.

6. Select extended options.

7. Input the supply voltage.

The supply voltage of the power module must be input manually in the respective field.

8. Click the Next button.

➱

After the Next button has been clicked, a comment box appears.

For a description of the comment box, refer to chapter 8.3.4.3 „Comment regarding indexer configuration data 
file“ on page 88.

By clicking on the Next button in the comment box, the indexer configuration is completed and the 
start window for the I/O configuration is opened.

(see chapter 8.3.5 „I/O configuration“ on page 89)

3.

4.

7.

5.

6.

8.

Summary of Contents for 3RT2017-1BB42













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands