Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 46/104
4.1 Fitting the locking bar
Figure: Fitting the locking bar
For information on the front-mounted guttering wall bracket and guttering wall bracket options,
please consult the relevant sections.
If taking the guttering wall bracket option, the front and rear locking bars are not used; if taking
the front-mounted guttering wall bracket option, the rear locking bar is not used.
Begin by fitting a post as a locking bar between the front two posts on the left and right, and
then erect the posts.
Then erect the rear posts. Also use one post here as a locking bar between the posts if this
option is being used.
Then affix the guttering to the posts.
If using the front locking bar, the round part of the post should be facing the front.
If using the rear locking bar (optional), the round part of the post should be facing the rear.
1
Tap 2 x M8 threads approx. 35 mm deep into the screw channels on the both sides of the posts
2
Screw the threads approx. 35 mm deep into both sides of the posts
3
Locking bar
A Front locking bar
B Rear locking bar, optional
v
Front
h
Rear
