Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 50/104
4.5 Fitting the front-mounted guttering wall bracket
If the guttering abuts against a wall at the front, the guttering can be affixed to the wall using
the guttering angle bracket. The angle bracket is optional.
At this point in time, no posts are used here.
The task of bolting the guttering angle bracket to the wall and the guttering is performed on-
site.
Bolting to the wall:
The appropriate screw fittings must be determined on site based on the state
of the building and structural safety requirements.
Bolting to the gutter:
The holes required to attach the angle bracket to the gutter must be drilled
into the gutter on site. To do this, place the guttering against the angle brackets fitted to the wall.
Then align the guttering and, using the angle brackets, mark where the holes are to be drilled and
drill the holes. When doing this, be sure not to cause any leaks in the gutter.
Figure: Fitting the front-mounted gutter wall bracket
1
Only drill into this area of the gutter; the diameter of the drill holes must match the screws
provided
2
Gutter angle bracket, to be fitted on-site
Cover cap for gutter angle bracket, to be fitted on-site
3
Screws for wall installation; to be selected on-site based on state of building and structural
safety requirements.
4,2x16
5,5x25
M10x30
