Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 12/104
3
Assembly
–
Terrazza Originale
3.1 Notes on installing wall b wall bracket glass bead
There are two places where the wall bracket glazing bead can be installed: "top and bottom".
Exactly where the wall bracket glazing bead should go depends on the thickness of the roof
covering and the roof pitch. Based on the place of installation, different wedge seals will be used.
The locations of both the wall bracket glazing bead and the rubber that is to be inserted are
indicated on the delivery note supplied.
If a sliding skylight is fitted to the wall bracket, the glazing bead wall bracket must be installed and
affixed first, followed by the sliding skylight.
Figure: Batten
UKW Bottom edge of wall
bracket
(see order confirmation)
