Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 71/104
5.2.1 Installing the wall bracket support angle
A wall bracket support angle must be affixed to the wall bracket at the 90° bend.
The task of drilling the holes for the support angle and affixing it is to be done on-site, in line
with the relevant building conditions.
Figure: Fitting the wall bracket support angle
1
Wall bracket support angle, 90 degrees
2
Drill the holes and affix the 90° wall bracket support angle
on-site; the number of fixings and their position must be
determined at the site of installation
