Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 43/104
3.19 Installing attachment profiles for glazing elements
An alternative method for installing the glazing elements is to fit attachment profiles for the 90
posts.
The attachment profiles are fitted to the sides of the 90 posts.
The attachment profiles are trimmed to match the length of the 90 posts.
At the top end, the attachment profiles will need to be notched on-site to accommodate the
guttering stop.
Drill Ø 3.8 mm holes into the 90 posts. Use the attachment profiles as a drilling template.
Then screw the attachment profiles in place. Screws should be added approx. every 500 mm.
If a gap should remain between the glazing elements and the attachment profiles, this can be
optionally closed using the top profile.
Be sure not to damage the 90 posts when installing the attachment profiles and glazing
elements.
Note
: The attachment profiles are not required with the 115 post.
Figure: Installing attachment profiles for glazing elements
A
B
a)
b)
35
36
27
(*)
90 post in the centre
View from rear
Glazing element with gap towards the attachment profile
Glazing element
Cut a notch in the guttering here
Guttering stop
Top profile
Optional
4,2x16
