Weichai America Corp.
47
Point 2:
Assembly
The valve tappet (2) the outer surface of the cylinder and the bottom of the clean oil, oil evenly;
The push rod (4) coated with clean oil, you must ensure that the ball and the Au have enough
lubricant
；
5.5
Valve removal and installation
5.5.1 Exploded view
1, Intake valve, 2, Cylinder head, 3, Valve spring seat, 4, Valve lock clamp, 5, Valve spring, 6,
Exhaust valve
Figure 5-5 Exploded view
5.5.2 Preparation before disassembly
1.
Equipment conditions: valve spring compressor or valve top pliers or other valve spring
tool depress
2.
Preparation before disassembly: Rocker arm shaft removal is complete, remove the cylinder
head from the body, and then remove the valve.
5.5.3 Dismantling
1.
Depress the valve spring seat (3) with the valve spring compressor or valve top pliers or
other tools, remove the valve lock clamp (4) and remove the valve spring seat (3) and the
valve spring (5);
2.
Remove the intake and exhaust valve (1) (6) from the valve seat.
5.5.4 Installation
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
