Weichai America Corp.
65
8.1.4 Installation
The installation steps are the opposite of the disassembly steps.
8.1.5 Maintenance points
1.
Assembly: Tightening torque according to standard;
2.
Assembly: Before the assembly should be carefully checked to see if there are cracks and
clean the various components;
3.
Requires no sealing surface sealing.
8.2
Oil filter dismantling and assembly
8.2.1 Exploded view
1. Hex head bolt 2. Flange 3. Gasket 4. Set filter
Figure 8-2 Exploded view
8.2.2 Preparation before disassembly
1.
Equipment conditions: Socket wrench
2.
Disassembly Preparation: Remove the oil pan
8.2.3 Dismantling
Loosen the two hexagonal bolts on the strainer and remove the strainer and strainer washers.
8.2.4 Installation
1.
Before assembly, check the collector filter and collector filter gasket to ensure that there are
no defects and damages in manufacture and use.
2.
Pre-installed weld to be checked whether there is a crack or leak welding, set filter assembly.
3.
Set the filter thread of the fastening bolt Weichai special 242 sealant, separated by a wave
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
