Weichai America Corp.
57
7.
Wipe off the impeller channel with gasoline, grease on the housing cavity.
8.
When reinstalling the compressor scroll case, tighten the fastening screws as required and
tighten the torque 15N.m.
9.
Disassemble the supercharger gasket and check for any visible damage to the supercharger
gasket and analyze the cause, regardless of whether the supercharger gasket is defective or
not, as long as disassembly requires replacement of new gasket.
If you need to disassemble the shaft components, please find a professional or commissioned by
the manufacturer for disassembly.
6.5
Mixed intake system with the disassembly and assembly of the group
6.5.1 Exploded view
1 & 7 & 25, hexagon socket head cap screws; 2, wave spring washers; 3, mixed intake manifold;
4 & 14 & 21 & 23, hex flange bolts; 5, temperature and pressure sensors; 6, hex nuts; 78 & 17 &
22, gaskets; Through valve 10 & 12 Clamp 11 Hose 13 & 24 Fixing bracket 15 Tube 16 Clamp
18 Electronic throttle 19 Washer 20 O-ring
Figure 6-5 Exploded view
6.5.2 Preparation before disassembly
1.
Equipment conditions: wrench, sleeve
2.
Preparation before disassembly: Remove other peripherals installed on the hybrid intake
manifold assembly.
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
