Weichai America Corp.
11
the seal must be pressed fully into the front cover groove.
2.4
Assembly and disassembly of flywheel housing
2.4.1 Exploded view of flywheel housing
1. Flywheel shell 2. Hexagon flange bolts to increase the series 3. Hex flange bolts to increase the
series 4. Cylindrical pins 5. Studs 6. Spring washers 7. Hexagon nut 1 8. Observation hole cover
9 Hexagon head bolt 10. Gasket 11. Hex head screw 12. Washer 13. Hexagon socket head cap 14.
Hydraulic pump cover 15. O-ring rubber seal 16. Hex head bolt 17. Speed sensor 18. Hexagon
head Screw 19. flywheel shell connector plate 20. hex head bolt 21. Hex flange bolts to increase
the series 22. Hex socket head cap screws 23. Hex flange bolts
Figure 2-5 Exploded view of flywheel housing
2.4.2 Preparation before disassembly
1.
Equipment conditions: Socket wrench
2.
Preparation before disassembly: Remove transmission and clutch, remove flywheel
2.4.3 Dismantling
1.
Remove the hydraulic pump cover fastening bolt and remove the hydraulic cover;
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
