Weichai America Corp.
56
6.4.3 Dismantling
Disassembly steps are the opposite of assembly steps.
6.4.4 Installation
1.
Assemble the turbocharger (22), booster gasket (5) and spacer (7) with the studs (6) and hex
nuts (8) and tighten them with a wrench.
2.
Assemble the supercharger and supercharger pre-assembled block to the exhaust pipe with
stud bolt (6) and hex nut (8) and tighten with wrench.
3.
Assemble the supercharger inlet pipe assembly (9) to the supercharger with the hollow bolt
(20) and the gasket (21) and the other end to the body and tighten with a wrench.
4.
Assemble the supercharger return pipe assembly (19) to the supercharger with hollow bolts
and ferrules and the other end to the return fitting with hose (17) and clamp (16).
5.
Assemble the supercharger inlet pipe assembly (1) to the supercharger through the corrugated
washer (3) through the hexagon socket head cap screw (2) and connect the other end with the
body through the double pipe joint (11) Tighten the wrench.
6.
Assemble the supercharger return pipe assembly (14) to the supercharger with a hexagon
socket head cap screw, tighten with a wrench and the other end with a rubber hammer into the
body oil return port.
6.4.5 Maintenance points
1.
Check the turbocharger and engine pipe connections have loose signs, and promptly ruled out.
2.
Check supercharger leaks, oil spill, water leakage, and promptly ruled out.
3.
Check the supercharger fastening screws are loose and promptly ruled out.
4.
Check the air filter, if the dust is too much, should be promptly cleaned
5.
Turbocharger disassembly, if you cannot rule out failure or do not have disassembly
conditions, should be submitted to the production or maintenance department.
6.
Remove the fastening screw on the compressor scroll, gently rock the compressor scroll
around the impeller, and beat the shell evenly with the rubber hammer. Do not allow the shell
to hit the impeller blades, nor loosen the shaft nuts.
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
