Weichai America Corp.
53
Assembly and disassembly steps on the contrary, intake pipe bolts recommended tightening
torque 23N · m.
6.2.5 Maintenance points
1.
Check the intake manifold for cracks, deformation and other damage, if you need to replace
the new intake manifold.
2.
Disassemble the intake manifold gasket, mix the intake manifold gasket, and check the gasket
for visible damage and analyze the cause, regardless of whether the gasket is defective or not,
as long as the disassembly are required to replace the new gasket.
3.
Check the temperature of the pressure sensor burnout, short circuit, etc., if you need to be
replaced.
6.3
Exhaust pipe disassembly and assembly
6.3.1 Exploded view
1 & 6, coolant connection hose; 2, water pipe fittings; 3 & 4 studs; 5, hex nuts; 7 & 13 cover plate
8 gasket 9 pipe joints 10 gasket 11 exhaust pipe total Into; 12, exhaust pipe gasket; 14, hexagonal
flange nut;
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
