Weichai America Corp.
30
Figure 4-3 Exploded view
4.2.2 Preparation before disassembly
1.
Equipment conditions: torque wrench, oil seal press equipment
2.
Disassembly Preparation: The generator and other components have been removed
4.2.3 Dismantling
The opposite of the installation sequence
4.2.4 Inspection
1.
Flywheel bolts, connecting bolts with or without thread damage.
2.
Flywheel, connecting plate surface with or without crushing.
3.
Flywheel ring without damage.
4.2.5 Installation
1.
Fit the ring gear (6) and the flywheel coupling plate (8) to the flywheel (7) and tighten the
connecting bolt (9) diagonally.
2.
Insert the cylindrical pin (2) at the rear end of the crankshaft (1), install the crankshaft rear oil
on the crankshaft gear (4), and press the rear oil seal into the rear oil seal.
3.
Punch the cylinder pin (5) onto the crankshaft timing gear (4).
4.
After inserting the flywheel guide rod in the crankshaft bolt hole, install the flywheel
1.
Crankshaft
2.
Pin
3.
Flywheel shell
4.
Crankshaft timing gear
5.
Pin
6.
Ring gear
7.
Flywheel
8.
connection plate
9.
Connecting bolt
10.
Flywheel bolts
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
