November 2008
Part No. 920559 Rev H
READ THIS MANUAL BEFORE YOU BEGIN
Dispensers have both electricity and a hazardous, flammable and potentially explosive liquid.
Failure to follow the below precautions and the Warning and Caution instructions in this manual
may result in serious injury. Follow all rules, codes and laws that apply to your area and installa-
tion.
SAFETY PRECAUTIONS - INSTALLATION AND MAINTENANCE
Always make sure ALL power to the dispenser is turned OFF before you open the dispenser cab-
inet for maintenance. Physically lock, restrict access to, or tag the circuit breakers you turn off
when servicing the dispenser. Be sure to trip (close) the emergency valve(s) under the dispenser
BEFORE beginning maintenance.
Make sure that you know how to turn OFF power to the dispenser and submersible pumps in an
emergency. Have all leaks or defects repaired immediately.
EQUIPMENT PRECAUTIONS
Be sure to bleed all air from product lines of remote dispensers and prime suction pumps before
dispensing product, otherwise, damage to the equipment may occur. Always use the approved
method for lifting the dispenser. Never lift by the nozzle boot, sheet metal, valance, etc., other-
wise equipment damage or personal injury may occur.
HOW TO CONTACT WAYNE
Technical questions related to the installation of the dispenser should be referred to Wayne
Technical Support (1-800-926-3737). Customers needing help with the operation of the dis-
penser should call the Wayne Help Desk (1-800-289-2963).
INDICATORS AND NOTATIONS
Danger indicates a hazard or unsafe practice which, if not avoided, will result in severe injury
or possibly death.
Warning indicates a hazard or unsafe practice which, if not avoided, may result in severe
injury or possibly death.
Caution indicates a hazard or unsafe practice which, if not avoided, may result in minor injury.
NOTE:
Important information to consider, otherwise, improper installation and/or damage to compo-
nents may occur.
DANGER
DANGER
WARNING
CAUTION
Summary of Contents for Ovation
