Waygate Technologies Krautkramer USM 10, Operating Manual

Page: 57 / 242

Remote Connection Setup 3 Initial start-up
Krautkrämer USM 100 Rev. - (09/2021) 57
Network connection
The USM 100 does not have a native RJ45 connector
for network connection.
You can connect a USB-C docking hub with network in-
terface to the USM 100 and connect the hub to the net-
work via its RJ45 connector (see page 53).
The computer with installed VNC client must be con-
nected to the same network.
Settings in the USM 100
An overview of the remote connection settings can be
found from page 104.
– Tap the Main Menu icon (see page 65) to display the
Main Menu (see page 60).
– Tap on the General settings button.
– Select the section Remote Connection .
– Tap the icon on the far right (eye/mouse) to allow full
remote access.
– If you only want to allow the screen display of the
USM 100 on the computer, but no remote control,
then tap the icon in the middle (eye).